J2B Synthesizer
avatar.jpgDescription: This is a port of the Soulsby Atmegatron 8-bit monophonic synthesizer to the Elektor J2B LPC1343 ARM Cortex-M3 board. The Atmegatron is quite a nice design with everything you...
View ArticleSame software for LPC810 to be found here
Very well done Goofo,I like it very much for my LPC800 mini-board, because there so few pins available on a LPC810.So I ported your Arduino software to the LPC800 system. And quess what: it worked...
View ArticleUSB Host changes after testing
I have tested the Vinculum I and Vinculum II USB Host chip in both UART and SPI mode, it has been a chore and not totally successful. Althought I managed to improve the throughput to a reasonable speed...
View ArticleLaser distance meter (low-budget)
foto (6).JPGDescription: With the use of a cheap CCD chip, laser diode, optics, and a single microcontroller a accurate distance meter is created. Distance range is up to 10meters, resolution is 1/2048...
View ArticleSneak peek...
Just managed to get into the lab and take some "furtive" pics of what's going on... ;)I've uploaded 4, but not within the contribution, see the main site of the project instead!Attachments: 0 photos |...
View ArticleISLRaw and ISLElektor
Please note I am using Windows 8.1.I have managed to set the ip address on the E-Lock board. However this required the downloading of several Borland files.Could you please provide a link to the files...
View ArticleProject description
Simple Nixie Clock [140013]Attachments: 0 photos | 1 schematics | 1 PCB(s) | 1 software files | 1 other 9140704144 read more
View ArticlePractical 4-channel ADC [140169]
140169-avatar.pngDescription: Following a project we did (130485) that involved an ADS1115 "Ultra-Small, Low-Power, 16-Bit Analog-to-Digital Converter with Internal Reference" from Texas Instruments,...
View ArticleSchematics or details on components?
Looks like a neat idea, specially since it's easy on the pocket :)Any schematics on the way maybe? Or more info on components?Attachments: 0 photos | 1 schematics | 0 PCB(s) | 0 software files | 0...
View ArticleOptically Isolated Unbalanced Audio Line Level Amplifier
Block diagram.JPGDescription: From the introduction: The circuit presented here was developed to break so called ground loops which cause unwanted hum and other noise to be injected into the audio line...
View ArticleEarth resistance meter
earth.jpgDescription: With this project, I like to build an Earth resistance meter (Megger).Attachments: 4 photos | 1 schematics | 0 PCB(s) | 1 software files | 0 other 9140704148 read more
View ArticleSound quality?
Hello Messtechniker,Do you have any data on bandwidth and distortion? Maybe we can do some measurements in our lab?RegardsClemensAttachments: 0 photos | 0 schematics | 0 PCB(s) | 0 software files | 0...
View ArticleRod distance?
Nice! In your case, what were the distances between the three rods? 10m like they mention in the diy faq?RegardsClemensAttachments: 0 photos | 0 schematics | 0 PCB(s) | 0 software files | 0 other...
View Articlefew questions
Hey Clemens, all,I have one little problem with my design where I might find the answer here:When I push the start button, sometimes i get random caracters on the LCD. After resetting the arduino, all...
View Article130544-1 Platino Transistor Tester
DSC07622_1.jpgDescription: IntroductionIt is tedious to read the markings on the transistor devices and to look up to its characteristics in datasheets and hence a handy transistor tester makes its way...
View Article130407-1_Platino Signal Generator
DSC07615_1.jpgDescription: Introduction:A Signal generator device generates signals of different frequencies. The platino Signal generator device uses the Elektor’s Platino board to design a real time,...
View Articlesc analyser 2005 werkende hex code
sc analyser.jpegDescription: De SC Analyser 2005 uit de elektor jaargang 2005 nummer 4 de hex code die op elektor-magazine bij dit nummer staat werkt niet.Attachments: 1 photos | 1 schematics | 1...
View ArticleUpdate schematic
New version of the schematic, with ATmega328 processor and power supplies in it.Also add transistor to control backlight, still need to program this!Im planning to draw a pcb so I can use the meter...
View Article130109 Lux meter 1 lux - 100 klux
Dscn3186_2.jpgDescription: 130109 Lux meter 1 Lux – 100 kLux(Designed by Karl-Anton Dichtel) The following is based on text and information the author provided. Due to the ban of incandescent lamps in...
View ArticleController for Household Appliance Motors - Request for Comments
avatar.jpgDescription: We want to start a project to develop a controller for motors scavenged from washing machines and similar household appliances. Several people have requested such a project, so...
View Article